Rustins Yacht Varnish

2.5 Litres (Gloss & Satin)
£48.00
£34.20
£41.04 (inc VAT)
Special Offer

- Maximum protection & durability
- Gloss & satin finish
- Excellent adhesion
- Specially formulated from tung oil
- Will not flake or peel
- Ideal for exterior doors & window frames
- Resistant to rain, sunlight, frost & salt


Description

Rustins Yacht Varnish is specially formulated from tung oil to give maximum protection and durability to marine and other external woodwork.

The varnish has excellent adhesion and will not flake or peel when correctly applied, making it ideal for exterior doors and window frames. 

Yacht varnish has good resistance to rain, sunlight, frost, salt and chemically polluted atmospheres. It also has a high degree of flexibility, giving enhanced protection to cracking, checking and loss of adhesion. 

During preparation, surfaces to be varnished must be dry, clean, smooth and free from dust, oil, grease and other contaminants. Cracks can be filled with Rustins Wood Filler. If the wood is open grained, Rustins Grain filler may be used before varnishing.

Apply by brush. The first coat on new wood should be thinned with 25 per cent white spirit and applied with a good quality brush.

Three coats are recommended, but porous end-grain or wood that is badly weathered may need further applications.

Drying time is around 12 hours, depending on temperature and humidity. Additional coats can be applied after 12 hours, depending conditions. Do not use below 10°C or in conditions of high humidity.

Coverage is 13 sq. metres per litre per coat.

Rustins Yacht Varnish is sold in 2.5L and 5L containers.

Full product data sheets and safety data sheets are available on request.

Specification

Product: Yacht Varnish
Type: Tung oil based wood finish available in gloss and satin finish
Intended Use: Suitable for all types of exterior hard and soft woodwork such as doors, window frames, cladding as well as marine woodwork
Special Features: Good resistance to rain, sunlight, frost, salt and chemically polluted atmospheres. A high degree of flexibility, giving enhanced protection to cracking, checking and loss of adhesion. Conforms to Safety of Toys Regulations BS EN 71 Part 3 1995
Preparation: Surfaces to be varnished must be dry, clean, smooth and free from dust, oil, grease and other contaminants. Cracks can be filled with Rustins Wood Filler. If the wood is open grained Rustins Grain filler may be used before varnishing
Application: Apply by brush. The first coat on new wood should be thinned with 25% White Spirit and applied with a good quality brush. Coats: Three coats are recommended but porous end-grain or wood that is badly weathered may need further applications
Drying Time: 12 hours depending on temperature and humidity
Re-coating Time: 12 hours depending on temperature and humidity
Application Temp: Ideally 15-25°C. Do not use below 10°C or in conditions of high humidity
Coverage: 13 sq. metres per litre per coat
Maintenance: When re-coating is necessary, clean down the surface with a mild detergent and water and lightly sand before coating
Compatibility: May be applied over old existing coating if these are in good condition and rubbed down to provide a key. Coatings not in good condition should be removed with Rustins Strypit Paint and Varnish Stripper. If applying over wood preservatives test on a small area to ensure the varnish dries and adheres well. Cannot be applied over Creosote
Settlement: STIR WELL BEFORE USE
Shelf-life/Storage: Many years if stored in cool dry conditions with the lid tightly closed
Hazards: Flammable. Keep out of reach of children. Avoid contact with skin and eyes. No Smoking. A full Health & Safety Data Sheet is available upon request or on www.rustins.co.uk
Clean-Up: Use White Spirit or Rustins Brush Cleaner whilst still wet. If dried on, clean equipment and brushes with Rustins Brush Restorer. Sizes: 250ml 500ml 1 L 2.5 L 5 L Satin not available in 5 L

Reviews

You're reviewing:

"Rustins Yacht Varnish"