FREE UK Delivery: Use Voucher Code FREEDEL
Flag Performance Extra Antifouling Paint is a copper-based anti-fouling.
Manufactured in the UK by FLAG, this anti-fouling is semi-hard to enable use in most craft up to 40 knots but still able to refresh its surface with some mild erosion.
Proven performance for all types fouling in all waters, this paint has been thoroughly tested in some of the toughest waters in the world.
This product is self-priming when topping-up existing anti-foulings. It is also suitable for long distance cruisers or racers due to the semi-hard nature of the paint system.
Before application, the surface should be stable, firm, dry and free of dust, sand, loose old paint, dirt, grease and oil.
Touch dry in two hours, depending on conditions. Over-coating can take place after six hours.you mea
Theoretical spreading rate is 10 sq. metres per litre.
Full product data sheets and safety data sheets are available on request.
Area of use: Boat hulls
Substrates: GRP, wood, steel and ferro cement. Not suitable for aluminium or galvanised surfaces.
Packing: 2.5 litre
Colour: Black, Dark Blue, Light Blue, Red and Steel White
Volume solids: 75%
Theoretical spreading rate: 10 sq.metres per litre
Flash point: 42ºC
Specific gravity: 1.80
Dry to touch: 2 hours
Over-coating time: 6 hours
Should be launched within 2 – 3 months dependent on ambient temperature.
Application method: Brush, Conventional spray, Airless spray, Roller.
Thinner: FLAG Antifouling Thinners
Cleaning of tools: FLAG Antifouling Thinners
Surface condition: The surface should be stable, firm, dry and free of dust, sand, loose old paint, dirt, grease, oil and salt.
*The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate, and the relevant consumption factor. The physical constants are subject to normal manufacturing tolerances.