Flag Anti Slip (Water Based) Floor Paint is a quick-drying, non-toxic and low-odour acrylic paint that has been designed to seal, colour and protect concrete floors. Sold in 5 litre containers.
The floor paint contains dolomite stone for added strength and anti-slip* properties.
It has excellent water, petrol and oil resistant properties and is also ideal for general walkways.
The Flag paint has long-lasting durability and colour retention. It is the toughest water-based acrylic floor paint ever made by Flag.
Before application, the surface should be stable, firm, dry and free of dust, sand, loose old paint, dirt, grease and oil.
It is touch dry in one to two hours, depending on conditions. Re-coating may take place after 8-10 hours, but do not exceed five days for over-coating.
This paint has a theoretical spreading rate of 10-12 sq.metres per litre.
Full product data sheets and safety data sheets are available on request.
*Note: This product has anti-slip properties and therefore provides slip resistance. However, it is not possible to guarantee a totally non-slip surface.
Sealing/Priming: It is only necessary to seal a porous substrate such as new or bare concrete. A sealer coat is achieved by adding 10 per cent water to the paint. Please note any new concrete floor can only be painted after 6-8 weeks.
Substrates: Interior and exterior, including concrete, stone and wooden floors. Not suitable for all exterior applications.
Colours: Red-04C39 Green-14C39 Grey-00A05 Blue-20D45 and Black
Finish: Semi Gloss
Volume solids: 50 per cent
Theoretical spreading rate: 10 – 12 sq.metres per litre*
Flash point: N/A
Specific gravity: 1.20
Dry to touch: 1 - 2 hours (based on 20°C with ventilation/air movement)
Overcoating time: 8 – 10 hours (do not exceed five days for over-coating)
Application method: Brush or Roller
Cleaning of tools: Water
Surface condition: The surface should be stable, firm, dry and free of dust, sand, loose old paint, dirt, grease and oil
*The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate, and the relevant consumption factor. The physical constants are subject to normal manufacturing tolerances
I was looking for a good quality, not too expensive floor paint and was put onto this flag water based stuff. I bought 4 tins in grey and I'm very happy with the results. It went down well and gave good coverage.
good quality paint at the right price. Thanks
I have used Flag water based floor paint plenty of times in the past. Its really good quality and gives good coverage. I highly recommend it.
Bought the Flag water based anti slip floor paint for our warehouse. Did the job - no complaints!