Flag Multi Purpose Metallic Primer is suitable for use above and below the waterline on all substrates with good waterproofing and corrosion resisting performance.
It can also be used as a primer or barrier coat under traditional anti-foulings, as well as on wood, steel and ferro cement.
Touch dry in two hours. Over-coating can take place after six hours.
Before application, the surface should be stable, firm, dry and free of dust, sand, loose old paint, dirt, grease, oil and salt.
Theoretical spreading rate is 12sq.metres per litre.
Full product data sheets and safety data sheets are available on request.
Area of use: Boat hulls, topsides and superstructure.
Substrates: GRP, wood, steel and ferro cement.
Volume solids: 60%
Theoretical spreading rate: 12sq.metres per litre
Flash point: 42ºC
Specific gravity: 1.17
Dry to touch: 2 hours
Over-coating time: 6 hours
Application method: Brush Conventional spray Airless spray Roller
Thinner: FLAG Anti-fouling Thinners
Cleaning of tools: FLAG Anti-fouling Thinners
Surface condition: The surface should be stable, firm, dry and free of dust, sand, loose old paint, dirt, grease, oil and salt.
*The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate, and the relevant consumption factor. The physical constants are subject to normal manufacturing tolerances.