Rustins Advanced Wood Protector is designed as a treatment to protect all types of bare wood from the adverse effects of weathering, rot, fungi and wood boring insects.
It is a water based, quick drying, non-flammable and low odour wood treatment.
Finely dispersed ingredients within this Advanced Wood Protector offer better wood penetration and greater effectiveness compared with standard wood preservation products. It makes surfaces more water repellent and reduces the rot and decay that can affect timber over time.
It is suitable for indoor and outdoor use on different types of timber, including pine, oak, mahogany, and more. It can be applied to wet or dry surfaces and should be over coated with a varnish or oil.
Ensure that timber surfaces are clean and free from previous coatings, grease and contaminants. Surfaces may be damp, but the preserver should not be applied to decayed wood which should be replaced. Coverage is approx. 3 – 4 sq. metres/litre per coat, depending on the absorbency of the surface.
Rustins Advanced Wood Protector is available in a choice of finishes - clear, medium brown, dark brown and green - in 5L containers.
Full product data sheets and safety data sheets are available on request.
Product: Rustins Advanced Wood Protector
Type: Coloured & Clear Wood Protector
Intended Use: For the treatment of bare wood to protect against rot, fungi and wood boring insects
Special Features: Finely dispersed ingredients giving better wood penetration and hence effectiveness compared with standard wood preservation products. Ready to use – do not dilute. Advanced Wood Protector needs to be over coated with a varnish or oil.
Preparation: Ensure that timber surfaces are clean and free from previous coatings, grease and contaminants. Surfaces may be damp but the preserver should not be applied to decayed wood which should be replaced
Application: Shake well and stir before use. Apply by brush or coarse spray. For outdoor applications the Clear Preserver needs to be over coated with an outdoor varnish or oil
Coats: Apply a minimum of 2 coats
Drying Time: Between 10 – 15 minutes depending on temperature and humidity
Re-coating Time: It is important that the second application is applied before the first is dry
Application Temp: Ideally 15 – 25°C. Do not apply below 10°C
Coverage: 3 – 4 sq. metres/litre per coat, depending on absorbency of the surface
Maintenance: Re-apply periodically
Compatibility: Not compatible with previous coatings, grease and contaminants
Settlement: Shake well and stir before use or colour obtained will not be correct
Shelf-life/Storage: Store in a cool dry place with the lid tightly closed. Use within 2 years of manufacture
Hazards: Very toxic to aquatic organisms. May cause long-term adverse effects in the aquatic environment. Keep out of reach of children. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. After contact with skin, wash immediately with plenty of water. Wear protective clothing, gloves and eye/face protection. A full Safety Data Sheet is available on request
Clean-Up: Clean equipment with water