FREE Delivery: Use Voucher Code FREEDEL
Excludes Zebra Machines and Zebra Paint
Resutop two pack epoxy resin for floors provides a seamless solution where high build resin floor coatings are required with resistance to chemicals, abrasion and impact. Resutop has been tested for ease of decontamination for the power industry and is low odour during application to provide a versatile and durable industrial resin flooring with an attractive gloss finish in a range of colours.
Full product data sheets and safety data sheets are available on request.
Product : Resuseal WB Clear
Finish : Satin
Recommended thickness range : 150-250 μm WFT per coat
Colour : Clear
Application Information at 20oC
Revised 08/2019—Issue 3 : REF : SEWB/CL 2017
150-250 microns WFT 42-70 microns DFT
*The suggested thickness range is calculated based on average volume solid as a general
recommendation for the specified condition and for each application may vary.
Solids Content by Weight 28%
Pack Sizes 5kg & 10kg
Pack Make Up 1 x Base 1 x Hardener
Shelf Life 24 months (Base & Hardener)
Storage Keep out of direct sunlight. Store in a dry place, between 15°C- 30°C. Product is not freeze-thaw stable.
Solids Content by Volume 31%
5kg will cover 32m2
@ 150 microns wet film thickness.
* Coverage rate is calculated based on a sealed and smooth surface and may vary based on the
substrate roughness and other conditions.
Pot Life Up to 60 minutes from mixing.
* water based epoxy may stay liquid for longer than specified pot life but it is recommended to use all
mixed paint within the pot life time frame. Application after pot life may affect the cure properties
such as gloss and adhesion.
Recoating Intervals 16 - 24 hours
Light Traffic 24 - 48 hours
Full Traffic 48 - 72 hours
Full Chemical Cure 7 - 10 days
Products required for this system
Primer : Resuseal WB Clear on dry substrates with less
than 70% ERH
System : 1 or 2 coats of Resuseal WB Clear
Surface Seal : Not required