Flag Rust Converter is a water-based heavy-duty rust cure that can help neutralise rust and form a hard black coating.
Manufactured in the UK by FLAG, this quick-drying and easy-to-use paint is suitable for ferrous metals and is for both interior and exterior use.
It prevents rust reoccurring by forming a tough surface that is suitable for over-coating with solvent based primers or top coats.
Before application, ensure the surface is free from all flaking material, dust, dirt, oil and grease. Metals - especially new/forged items - may require degreasing. Do not apply in temperatures below 10 degree centigrade.
Touch dry in one hour, depending on conditions.
Theoretical spreading rate is 2-3 sq. metres per 250ml.
Full product data sheets and safety data sheets are available on request.
Area of use: Interior and Exterior
Substrates: Ferrous Metals
Packing: 5 litres
Colour: Black
Finish: Satin
Volume solids: 40%
Theoretical spreading rate: 2-3 sq. metres per 250 ml
Flash point: N/A
Specific gravity: 1.20
Dry to touch: 1 hour
Application method: Brush, Spray. Minimum DFT 75µm, adjust accordingly for rough surfaces.
Thinner: Water
Cleaning of tools: Water
Surface Condition: Ensure surface is free from all flaking material, dust, dirt, oil and grease. Metals (especially new/forged items) may require degreasing. Do not apply in temperatures below 10 degree centigrade.
*The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate, and the relevant consumption factor. The physical constants are subject to normal manufacturing tolerances.