Flag Hammer Finish Paint

£14.99 (ex VAT)

- Ideal For Metal Surfaces, Radiators & Garden Furniture
- Semi-Gloss Finish
- Economical & Easy To Apply
- Corrosion Resistant Properties
- Touch Dry In 15 Mins

Flag Hammer Finish Paint gives a semi-gloss finish to metal substrates and has excellent corrosion resistant properties.

The hammer paint provides good protection when used in conjunction with QAD Anti Corrosive Oxide Primer.

It is economical and easy to apply. This paint is suitable for a wide variety of applications where speed and ease of use are required.

Before application, the surface should be stable, firm, dry and free of dust, sand, loose old paint, dirt, grease and oil.

Touch dry in just 15 minutes. Over-coating may take place after four hours.

Theoretical spreading rate: 12 – 15 sq.metres per litre.

Full product data sheets and safety data sheets are available on request.

Area of use: Internal/External/Industrial Structural Steel
Substrates: Metal
Colour: Black, Blue, Green, Silver
Finish: Semi-gloss
Volume solids: 45%
Theoretical spreading rate: 12 – 15 sq.metres per litre
Flash point: 23ºC
Specific gravity: 1.10
Dry to touch: 15 minutes
Over-coating time: 4 Hours
Application method: Brush / Conventional Spray / Airless spray
Thinner: Xylene (T10009)
Cleaning of tools: Xylene (T10009)
Surface Condition: The surface should be stable, firm, dry and free of dust, sand, loose old paint, dirt, grease and oil. 
*The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate, and the relevant consumption factor. The physical constants are subject to normal manufacturing tolerances.

Customer Product Reviews
You're reviewing:

"Flag Hammer Finish Paint"