Flag Anti Corrosive Quick Dry Metal Primer is a high-build, quick air-drying oxide primer for use on ferrous metals.
It provides good protection prior to over-coating with most solvent-based finishing products.
This primer is suitable for a wide variety of applications, where speed and ease of application are required.
Compatible with FLAG Hammer Finish and FLAG Smooth Metal paints.
Before application, the surface should be stable, firm, dry and free of dust, sand, loose old paint, dirt, grease and oil.
Touch dry within 15 minutes. Over-coating can take place after four hours.
Theoretical spreading rate is 12 – 15 sq.metres per litre.
Full product data sheets and safety data sheets are available on request.
Area of use: Internal/External Industrial Structural Steel
Colour: Red & Grey
Volume solids: 60%
Theoretical spreading rate: 12 – 15 sq.metres per litre*
Flash point: 23ºC
Specific gravity: 1.45 – 1.50
Dry to touch: 15 minutes
Over-coating time: 4 hours
Application method: Brush Conventional spray Airless spray
Thinner: Xylene (T10009)
Cleaning of tools: Xylene (T10009)
Surface condition: The surface should be stable, firm, dry and free of dust, sand, loose old paint, dirt, grease and oil.
*The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate, and the relevant consumption factor. The physical constants are subject to normal manufacturing tolerances.