Coo-Var Suregrip Anti-Slip Floor Paint

1, 2.5 & 5 Litres (9 Colours)
£22.23 (ex VAT)

  • Single Pack Aggregated Floor Paint
  • Rough, Anti-Slip Finish
  • Helps To Prevent Accidents
  • 1, 2.5 & 5L Containers
  • Easy to Apply
  • For Interior & Exterior Use
  • Suitable For Wood, Metal, Concrete, GRP
  • 9 Colours Available


Coo-Var Suregrip Anti-Slip Floor Paint

Indoor & outdoor floor paint for foot, light truck & occasional heavy truck traffic

Coo-Var® Suregrip® anti-slip floor paint is a ready-mixed floor coating for suitably primed concrete, wood, metal and GRP which provides a rough, anti-slip finish when dry. Suregrip provides durability, decoration and protection. Suitable for indoor and outdoor use. Coo-Var® Suregrip® is a safety coating suitable for indoor and outdoor use where a sure foothold is required. Ideal for boats, steps and stairways, disabled ramps, doorways, machinery areas, most floors and other areas where moisture and other substances may cause the floor to be slippery. Suitable for use on suitably prepared concrete, wood, metal and GRP. For foot, light truck and occasional heavy truck use.

Application: Roller or brush

Drying time: Touch Dry 6 hours or 24 hours hard dry

Overcoat time: 16 hours or overnight

Estimated Coverage: 6-10m² per litre

Surface Preparation

All surfaces should be clean, dry, sound and free from contaminants. Concrete - power floated, granolithic and smooth surfaces should be roughened first to provide a good "key" for the paint. This can be done mechanically by abrading or blasting, or chemically using Coo-Var Acid Etch. These processes will have the advantage in addition to preparing the surface of also removing dirt and laitance. New concrete must be allowed to cure thoroughly which can take up to 3 months. Apply a 10% thinned coat of Coo-Var Floor Paint to prime and seal the surface prior to applying Coo-Var® Suregrip®. Other surfaces have to be prepared and primed with the suitable primer for that substrate. Existing painted surfaces - Surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced. Remove all loose and flaking material and treat bare areas as new substrate and prepare accordingly.

Application Conditions

As dictated by normal good painting practice. In confined spaces, provide adequate ventilation during application and drying.

Preceding Coat

Coo-Var Penetrating Wood Primer on wood, Coo-Var Zinc Phosphate Metal Primer on ferrous metals, 10% thinned Coo-Var Floor Paint or Coo-Var Alkali Resisting Primer on concrete.

Subsequent Coat

Coo-Var® Suregrip®

Height: 16 CM
Width: 15.5 CM
Depth: 15.5 CM
Weight: 3.1 KG
Pack Quantity: 1
Paper: 3 Grams
Plastic: 5 Grams
Steel: 27 Grams
UN Number: 1263
Packing Group: III
Hazard Class: 3
Flashpoint: 0
Commodity Code: 32100010
GHS Haz Code: AAJ5
SDS Ref: 125/G139/ ALL COLOURS

Customer Product Reviews
  • Coo-Var Suregrip non slip paint

    Very happy with the colour and the non slip finish. Floor looks great.

  • Good quality

    Bought 5L suregrip in grey. Very good anti-slip finish.

  • Very grippy finish

    I used Coo Var Sure Grip paint on a ramp outside our community centre and it was'nt too difficult to apply. It's a good thick paint and the result is indeed very grippy.

You're reviewing:

"Coo-Var Suregrip Anti-Slip Floor Paint"