Coo-Var Profloor Plus Fast Hardening Floor Paint

5 Kilograms (12 Colours)
£213.18 (inc VAT)
Special Offer

  • Hard-Wearing Floor Coating
  • Fast-Curing, Heavy Duty Paint
  • Low Odour & Solvent-Free
  • Hard Film Gloss Finish
  • Quick Drying
  • Apply 2 Coats in One Day
  • Anti Slip Additive Available
  • 12 Colour Range Available


Coo-Var Profloor Plus Fast Hardening Floor Paint

Rapid curing industrial floor coating

Coo-Var Profloor Plus is a heavy duty, low viscosity, solvent free epoxy floor paint with outstanding abrasion and chemical resistance. It has the benefit of being solvent free, it is low odour during application which allows usage in areas where taint could be a problem. Ideal for use in factories, workshops / garages, stadiums and other high wear public places. An anti slip option is available.

Application: Shortpile Roller or brush

Drying time: Touch Dry 4 hours or 10 hours hard dry

Overcoat time: 4 hours

Estimated Coverage: 4-5m² per kg

Surface Preparation

All surfaces should be clean, dry, sound and free from contaminants. Concrete - power floated, granolithic and smooth surfaces should be roughened first to provide a good "key" for the paint. This can be done mechanically by abrading or blasting, or chemically using Coo-Var Acid Etch. These processes will have the advantage in addition to preparing the surface of also removing dirt and laitance. New concrete must be allowed to cure thoroughly which can take up to 3 months. Other surfaces have to be prepared and primed with the suitable primer for that substrate. Existing painted surfaces - Surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced. Remove all loose and flaking material and treat bare areas as new substrate and prepare accordingly.

Application Conditions

As dictated by normal good painting practice. Do not apply if the temperature is likely to drop below 10 °C during application or during the drying process. In confined spaces, provide adequate ventilation during application and drying.

Preceding Coat

Apply direct to ordinary stable concrete. Coo-Var High Performance Primer should be used where the surface is smooth, polished or porous. On Metal use Teamac 2 Pack Zinc Phosphate Primer. Can be used on wood asphalt and tarmac. Coo-Var Dampshield and Coo-Var Oil Tolerant Primers are also available. See relevant Technical Data Sheets.

Subsequent Coat

Coo-Var Profloor Plus Floor Paint


Height: 23.5 CM
Width: 18.5 CM
Depth: 18.5 CM
Weight: 5.95 KG
Pack Quantity: 1
Paper: 4 Grams
Plastic: 6 Grams
Steel: 39 Grams
UN Number: 3082
Packing Group: III
Hazard Class: 9
Flashpoint: 0
Commodity Code: 32100010
GHS Haz Code: RAL4
SDS Ref: 136/Q220/Z - BASE


You're reviewing:

"Coo-Var Profloor Plus Fast Hardening Floor Paint"