Proud to support Glaucoma UK for 2024. We will donate £1 for every purchase made.


Coo-Var Anti-Slip Step & Ramp Paint

1 Litre (6 Colours)
£22.80 (inc VAT)
Special Offer

  • Anti-Slip Paint For Steps & Ramps
  • Suitable for Internal & External Use
  • Low Odour & Fast Drying
  • Hard Wearing
  • Water Based
  • Low Risk In Wet & Dry Conditions
  • Suitable For Concrete, Wood Tarmac & More
  • Sold in 1 Litre Tins

Free Delivery on orders over £100. Use code: FDAPR


Coo-Var Anti-Slip Step & Ramp Paint

Durable & hard-wearing anti-slip finish for multiple surfaces

Coo-Var Anti-Slip Step & Ramp Paint is used to provide a durable and hard wearing surface with an anti-slip finish. This product has been independently tested and has a PTV rating of 68 in dry conditions and 58 in wet. UK law recommends on a minimum Pendulum Test Value on floors of 36 dry, wet or contaminated. Suitable for indoor and outdoor use. Low odour & fast drying, hard wearing, water based and low slip risk in dry and wet conditions. It can be used on concrete, wood, tarmac, stone, brickwork and suitably prepared metal.

Low Risk In Wet & Dry Conditions (Tested to BS7976-2)

Application: Roller or brush

Drying time: Touch Dry 1 hours or 2 hours hard dry

Overcoat time: 6 hours

Estimated Coverage: 5-9 sq m² per litre

Surface Preparation

All surfaces should be clean, dry, sound and free from contaminants. Concrete - power floated, granolithic and smooth surfaces should be roughened first to provide a good "key" for the paint. This can be done mechanically by abrading or blasting, or chemically, using Coo-Var Acid Etch. These processes will have the advantage in addition to preparing the surface of also removing dirt and laitance. New concrete must be allowed to cure thoroughly which can take up to 3 months. Other surfaces have to be prepared and primed with the suitable primer for that substrate. Existing painted surfaces - Surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced. Remove all loose and flaking material and treat bare areas as new substrate and prepare accordingly.

Application Conditions

As dictated by normal good painting practice. In confined spaces, provide adequate ventilation during application and drying. Do not paint when temperature will be at or below 7 °C during the painting and drying process.

Preceding Coat

Apply direct to wood, Coo-Var All Metals Primer on Metal, Coo-Var Anti-Slip Step & Ramp Paint thinned 5% with clean water on all other unpainted surfaces.

Subsequent Coat

Coo-Var Anti-Slip Step & Ramp Paint


Do not paint when temperature will be at or below 7 °C during the painting and drying process.



Height: 12 CM
Width: 11.5 CM
Depth: 11.5 CM
Weight: 1.25 KG
Paper: 2.2 Grams
Steel: 14 Grams
UN Number: 0
Hazard Class: 0
Flashpoint: 0
Commodity Code: 32100090
GHS Haz Code: BAD2
SDS Ref: 118/W460 - ALL COLOURS


You're reviewing:

"Coo-Var Anti-Slip Step & Ramp Paint"