Coronavirus (COVID-19): We’re still delivering to our customers safely following the latest Government advice.

Rustins Ring Remover 125ml

£2.88

- Removes water & heat mark damage
- Restores gloss
- Removes minor defects
- Mixture of fine abrasives
- Ideal for lacquers, varnishes & French Polish

Rustins Ring Remover is a mixture of fine abrasives that will remove water and heat mark damage from a range of polished surfaces such as lacquers, varnishes and French Polish.

The Ring Remover will also restore the gloss and remove minor defects from finishes on coffee tables, tabletops and most polished surfaces. Will not destroy attractive patina that has been acquired due to ageing.

During preparation, the surface must be clean, smooth, dry and free from wax, dust and contaminants. Pour the Ring Remover onto a lint-free cloth and rub with pressure over the mark in the direction of the grain until the mark is removed.

Coverage is 10-12sq.metres/litre per coat, depending on the absorbency of the surface.

Rustins Ring Remover is sold in 125ml containers.

Full product data sheets and safety data sheets are available on request.

Product: Ring Remover
Type: A mixture of fine abrasives dispersed in special water based lubricating medium.
Intended Use: Removal of water and heat mark damage from a range of polished surfaces such as lacquers, varnishes and Rustins French Polish.
Special Features: Low odour. Will not destroy attractive patina that has been acquired due to ageing.
Preparation: The surface must be clean, smooth, dry and free from wax, dust and contaminants. SHAKE WELL BEFORE USE
Application: Pour the Ring Remover onto a lint free cloth and rub with pressure over the mark in the direction of the grain until the mark is removed. If the mark does not disappear apply more Ring Remover to the cloth and continue rubbing until the mark is removed. Buff with a clean cloth and then wax if required. For deeper marks the Ring remover can be applied with Rustins Fine Steel Wool (grade0000). For satin or matt finishes the same grade of steel wool may be used to matt the surface down after the Ring Remover has been used as it may produce a shiny surface.
Coats: N/A
Drying Time: N/A
Re-coating Time: N/A
Application Temp: Ideally 15-25°C.
Coverage: Coverage 10-12sq.metres/litre per coat, depending on the absorbency of the surface.
Maintenance: Re-apply when necessary.
Compatibility: Compatible most polished surfaces such as lacquers, varnishes and Rustins French Polish. Settlement: SHAKE WELL BEFORE USE.
Shelf-life/Storage: Many years if stored in original, tightly closed container in normal conditions. Protect from frost.
Hazards: Non-flammable. Flash point: Nil. Avoid contact with eyes, skin and clothing. Wash hands after use and dry them. A Full Safety Data Sheet is available upon request or on www.rustins.co.uk
Clean-Up: Warm soapy water.
Sizes: 125ml

Customer Product Reviews
You're reviewing:

"Rustins Ring Remover 125ml"