Coronavirus (COVID-19): We’re still delivering to our customers safely following the latest Government advice.
Rustins Anti-Condensation Paint is a quick drying, water based matt white paint with mould inhibitors, that helps to reduce condensation in areas prone to heat and high humidity, such as kitchens and bathrooms.
It is formulated with a non-yellowing acrylic emulsion and high quality white pigment, to produce a brilliant white thermal insulation layer that reduces condensation under damp and humid conditions indoors.
It has a low odour formulation and it is dry in just two hours.
It also has excellent stain covering properties that will not only prevent unsightly stains, it will cover them as well.
Apply to clean, smooth, sound and dry ceilings and walls - free from wax, dust and contaminates. If the surface is newly plastered, allow 2 weeks to dry. If porous, apply 1 coat of Rustin’s Quick Dry White Primer/Undercoat and allow to dry before applying the anti-condensation paint.
Emulsion paint or wallpaper may be applied over Rustins Quick Drying Anti Condensation Paint.
Coverage is approx 7 sq. metres/litre per coat.
Rustins Anti-Condensation Paint is available in 250ml, 500ml and 1L sizes.
Full product data sheets and safety data sheets are available on request.
Product: Rustins Quick Drying Anti-Condensation Paint
Type: Formulated with a non-yellowing, acrylic emulsion and high quality white pigment, (titanium dioxide) to produce a brilliant white thermal insulation layer to reduce condensation under damp or very humid conditions indoors.
Intended Use: For use on interior walls and ceilings, primarily in kitchens and bathrooms.
Special Features: Non-yellowing. Quick drying. Low odour. Clean brushes in water.
Preparation: The surface must be clean, smooth, sound, dry and free from wax, dust and contaminates. If the surface is newly plastered, allow 2 weeks to dry. If porous, apply 1 coat of Rustin’s Quick Dry White Primer/Undercoat and allow to dry before applying the anti-condensation paint.
Application: Forms a soft crust on storage which must be well stirred into the body of the paint before use. Apply liberally and evenly with a synthetic fibre brush.
Coats: 1 or 2 coats as required.
Drying Time: Touch dry within 30 minutes, depending on temperature and humidity.
Re-coating Time: Allow 4 hours between coats, depending on temperature and humidity.
Application Temp.: Ideally 15-25°C. Do not use below 10°C or in conditions of high humidity.
Coverage: Approximately 7 sq. metres/litre per coat.
Maintenance: Clean painted surfaces with a mild detergent solution.
Compatibility: Can be applied over Rustin’s Quick Drying Primer & Undercoat and Rustin’s White Undercoat. Emulsion paint or wallpaper may be applied over Rustins Quick Drying Anti Condensation Paint.
Settlement: STIR WELL BEFORE USE.
Shelf-life/Storage: Many years if stored in original tightly closed container in normal conditions. Do not store below 5°C. Protect from frost.
Hazards: Non-flammable. Flash point Nil. Avoid contact with eyes and skin. In case of contact with eyes, rinse immediately with plenty of water and seek medical attention. After contact with skin, wash immediately with plenty of soap and water or a proprietary skin cleanser. Keep out of reach of children.
Clean-Up: Clean brushes and hands immediately after use with water. If dried on, clean equipment and brushes with Rustins Brush Restorer.
We have been getting damp problems in one of the kids bedroom recently, so I thought I would give this a go to help it. I used it as an undercoat before putting a blue gloss on top of it. Its been a few weeks and there are no signs yet of damp or mould, so we will see what happens going forward! I'm very happy with it so far.
Havent had any problems since I applied this paint. Seems to work.