Survey Marking Paint

Marking Paints for Land Surveys and Construction

A survey mark should be identifiable and understandable. It could be a point with a number, an arrow or even a line to show where work is going to take place.

Surveying marking paint must be high-quality to last long. It must also be bright so that it can be seen from a distance. You want a spray pattern that will allow you to achieve this. Whether you are creating small numbers and symbols or long marking out lines, you want the paint to last for the duration of your project.

We have a range of survey marking paint to suit your requirements. From identifying individual points to labelling and temporary setting out.

What Survey Marker Do I Need?

Survey Spray Paint for Identifying Points and Labelling

ProSolve Survey Marker Paint is ideal for general survey marking. It has a fine spray pattern which will allow you to spray letters and numbers.

It comes in boxes of 12 x 750ml cans with 7 colours that you can choose from. This product can be used on stone, brick, asphalt, concrete, timber, and steel. Make sure you test it against the surface you are spraying before marking an entire area.

This is an ideal product to consider if you need to identify multiple points or leave a message for the next crew on site.

Compact Survey Markers

If you only need to mark points, then a smaller can may be easier to carry around.

ProSolve Spot Marker Spray Paint comes in boxes of 12 x 275ml cans. This is a quick-drying, semi-permanent paint. Available in white and yellow.

This product has an estimated lifespan of 3-6 months. So, it is something to consider if your marks need to last longer than a day's work.

Temporary Survey Marking Paint

If you know that your setting out will change or you need the paint to be removable, then consider our temporary range.

Our ProSolve Temporary Spray Paint is a water-based paint. It comes in boxes of 6 or 12 x 750ml cans. The lifespan of this product is approximately 4-6 weeks, depending on the weather, how it's applied and footfall.

You can remove this by brushing with water or pressure washing (where applicable). Always check this before you apply to a surface.

Hi-Vis Marker Paint

If you need your markings to stand out, consider our hi-vis fluorescent marker paint.

This product is a quick-drying, permanent hi-vis paint. It comes in boxes of 6 or 12 x 500ml cans. As this is described as a permanent product, it should not be compared to temporary paints.

Make sure you choose a colour that will contrast with the surface and follow any colour system that you are currently using.

How Long Do I Need My Survey Marks To Last?

As mentioned above, you may only need to create points for a short period of time, or you may need them to last for the duration of your project.

Always consider how long you need your marks to last. Do you need to mark points for tomorrow or next week? Will there be vehicle movement over the area? Do you need the surface to be clear when you have finished? These are key questions to consider.

Don’t assume that temporary means the same as semi-permanent. Compare the products and their removal instructions.

If you need to remove the paint, test the paint and removal method on a small area before committing to full coverage.

Ensure Your Survey Marks Are Understandable

Make sure that your numbers, letters, and symbols are consistent throughout your work area. If multiple people are marking the site, make sure everyone knows what you're using.

Test your spray pattern on a suitable surface before spraying your final mark. Remember to shake and clear the nozzle after use.

Don’t make your marks too small. You want to be able to identify what you have marked.

Utility Markings and Colours

Use the Correct Colours for Your Work

Always check with your surveyor/client what colours you need to use. You should have a legend that goes along with your markings.

Street Works UK provides information on what colours to use for pipes, cables, and ducts. These should be used as a guide for spray paint colours. They also advise that some paints may not follow these recommendations.

Marking with paint shows information about services. You should still locate services before you dig. Always follow HSE guidelines when working near buried electrical cables.

Buying Survey Marking Paint

Remember to check how big each can is and how many cans per box. We have a variety of sizes within our survey marking range.

If you are using a handheld applicator, make sure it fits your chosen can and spray head. If you are spraying by hand, compare the spray heads.

If you are unsure, contact us with the surface you need to spray, colours and how long you need the marks to last.

Survey Marking Paint Frequently Asked Questions

Can all survey paint be washed off?

No. Some will wash off easier than others. Make sure you choose a product that has removal instructions if you need it to.

How long will my survey marks last?

This will depend on the product you choose, as well as weather conditions and how much foot traffic the area gets.

What colours do I need for utility markings?

You should follow the colours that your surveyor has given you. Or the colours that go along with your markings.

Are fluorescent paints temporary?

Not always. Fluorescent just means that the paint will glow in the dark. Our ProSolve hi-vis product is a permanent fluorescent paint.

Can I use survey aerosols with a handheld applicator?

Yes, some of them can. Just make sure the applicator fits your chosen can and spray head.