Rustins Quick Dry Timberlife5 Litres (6 Colours)

Rustins Timberlife is a quick-drying, high-quality acrylic decorative finish containing fungicides that protect and add life to garden timber.

Attractive wood shades are achieved with special pigments, which resist UV light and fading. Ideal for new or weathered sheds, fences, decking, gates and other garden furniture. Highly water repellent and resistant to fading. 

Protects timber for up to five years. Low odour and water repellent once dry. Harmless to pets and plants. Resistant to fading. Greater coverage than creosote.

During preparation, existing paint and varnish should be removed with Rustins Strypit Paint & Varnish Stripper. Remove lichens, algae and moss with a brush, scraper and domestic bleach, then rinse thoroughly and allow to dry.

Apply with a synthetic fibre brush, using the largest practicable for the job. Clean splashes while damp with water.

Two coats recommended, but the colour will deepen as more applications are made. Touch dry within 30 minutes, depending on temperature, humidity and absorbency of the wood. Possible to re-coat within two hours. Do not apply below 10°C, or if rain expected.

Coverage is 6-12 sq.m per litre, per coat, depending on the absorbency of the wood.

Rustins Quick Dry Timberlife is sold in 5L containers.

Full product data sheets and safety data sheets are available on request.

Product: Timberlife
Type: Rustins Timberlife is a quick drying, high quality acrylic decorative finish. It contains fungicides to preserve the film and waxes togive long lasting protection from rot and mould. Attractive wood shades are achieved with special pigments, which resist UV light and fading.
Intended Use: Exterior garden furniture, fences, sheds, trellis work For both new or previously treated.
Special Features: Protects timber for up to 5 years. Low odour. Clean brushes in water. Water repellent once dry. Harmless to pets and plants. Resistant to fading. Greater coverage than creosote. Quick drying. Available in Clear and Light, Medium and Dark Oak, Mahogany, Teak and Walnut.
Preparation: Existing paint and varnish should be removed with Rustins Strypit Paint & Varnish Stripper. Remove lichens, algae and moss with a brush, scraper and domestic bleach, then rinse thoroughly and allow to dry.
Application: Clean surfaces to be treated as above. Apply with a synthetic fibre brush, using the largest practicable for the job. Clean splashes whilst damp, with water. Clean brushes and hands immediately after use with water.
Coats: 2 coats recommended. The colour will deepen as more applications are made.
Drying Time: Touch dry 30 minutes depending on temperature, humidity and absorbency of the wood.
Re-coating Time: 2 hours.
Application Temp: Ideally 15-25°C. Do not apply below 10°C, or if rain expected.
Coverage: 6-12 sq.m per litre, per coat, depending on the absorbency of the wood.
Maintenance: Clean surfaces before re-coating.
Compatibility: Timberlife can be over-coated with the Rustins paints and varnishes. Timberlife can be applied over other fence and shed treatments and weathered creosote.
Settlement: STIR WELL BEFORE USE.
Shelf-life/Storage: Many years if stored in original, tightly closed container in normal conditions. Do not store below 5°C. Protect from Frost.
Hazards: Non-flammable. Flashpoint Nil. May be harmful if swallowed. Avoid contact with eyes and skin. Splashes to eyes and skin should be rinsed with plenty of clean water. Keep out of reach of children. A full Safety Data Sheet is available upon request or at www.rustins.co.uk
Clean-Up: With water whilst still wet. If dried-on, clean brushes with Rustins Brush Restorer.