Flag Smooth Finish Metal Paint2.5L & 5L (2 Colours)

Flag Smooth Finish Metal Paint is a quick-drying gloss finish for metal substrates.

Manufactured in the UK by FLAG, this solvent-based paint is easy to use for rapid long-lasting protection.

This quick-drying gloss finish boasts a hard, durable finish to metal substrates.

It provides excellent protection when used in conjunction with QAD Anti Corrosive Oxide Primer.

Economical and easy to apply, this metal paint is suitable for a wide variety of applications where speed and ease of application are required.

Before application, the surface should be stable, firm, dry and free of dust, sand, loose old paint, dirt, grease and oil.

Touch dry in 15 minutes, depending on conditions (ideally 20°C). Over-coating can take place after four hours.

Theoretical spreading rate is 12-15 sq. metres per litre.

Full product data sheets and safety data sheets are available on request.

Area of use: Internal/External Industrial Structural Steel
Substrates: Metal
Packing: 2.4L/5L
Physical Constants:
Colour: Black, Silver
Finish: Gloss
Volume solids: 45%
Theoretical spreading rate: 12 – 15 sq.metres per litre
Flash point: 23ºC
Specific gravity: 1.10
Dry to touch: 15 minutes
Over-coating time: 4 Hours
Application method: Brush / Conventional Spray / Airless Spray
Thinner: Xylene (T10009)
Cleaning of tools: Xylene (T10009)
Surface Condition: The surface should be stable, firm, dry and free of dust, sand, loose old paint, dirt, grease and oil.
*The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate, and the relevant consumption factor. The physical constants are subject to normal manufacturing tolerances.