Flag Shellac Sanding Sealer5 Litres

Flag Shellac Sanding Sealer is made from a blend of shellacs and zinc stearate that make it ideal for sealing new or stripped wood prior to waxing and French polishing.

Manufactured in the UK by FLAG, this gloss finish shellac works best if the wood is sanded down before application to ensure a perfect finish.

Before application, the surface should be stable, firm, dry and free of dust, sand, loose old paint, dirt, grease and oil.

Touch dry in five to 10 minutes, depending on conditions (ideally 20°C). Over-coating can take place after 15 minutes.

Theoretical spreading rate is 18 sq. metres per litre.

Full product data sheets and safety data sheets are available on request.

Area of use: Interior
Substrates: Wood
Packing: 5 litres
Physical Constants
Colour: Transparent
Finish: Gloss
Volume solids: 25%
Theoretical spreading rate: 18 sq. metres per litre
Flash point: 18°C
Specific gravity: 0.87
Dry to touch: 5 - 10 minutes (20°C)
Over-coating time: 15 minutes
Application method: Cloth or Pad
Thinner: Methylated Spirit
Cleaning of tools: Methylated Spirit
Surface condition: The surface should be stable, firm, dry and free of dust, sand, dirt, grease and oil.
*The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate, and the relevant consumption factor. The physical constants are subject to normal manufacturing tolerances.