Flag Roofix 20/10 Roof Repair Waterproofing Paint5 Litres (4 Colours)

Flag Roofix 20/10 Roof Repair Waterproofing Paint has been specifically developed to provide instant waterproofing for leaking roofs.

It is an all-weather product, which can be applied even in damp conditions. Roofix 20/10 can be used to repair specific areas that are leaking or totally waterproof an entire roof.

This product is multi-purpose and can be utilised on a wide variety of problem areas.

Made in the UK, it is a single pack elastomeric acrylic based (non bitumastic) compound with built in Draylon fibre reinforcement, which provides excellent flexibility and durability.

Roofix 20/10 does not require special primers and can provide long term protection in excess of 10 years.

Before application, the surface should be stable, firm, dry and free of dust, sand, loose old paint, dirt, grease and oil. It should not be applied in the rain or when rain is likely. Pooled water must be removed before application.

Touch dry in 16 hours, depending on conditions (ideally 20°C). Curing takes between two to three days.

Theoretical spreading rate is 1 sq. metre per litre.

Full product data sheets and safety data sheets are available on request.

Area of use: roof areas, gutters, lead flashing, slates, asbestos, cement, metal, asphalt, old roofing felt, bay window and porch areas.
Substrates: A wide variety of roofing materials. New roofing felts (or similar materials) can be highly porous and friable (because of the green/grey stone flakes on the top) they also contain high levels of bitumen, it is recommended that these types of new surfaces are allowed to weather for a minimum of 6 - 8 months before the application of Rooffix.
Colours: Black, White, Grey & Solar Reflective
Finish: Semi gloss
Volume solids: 48%
Theoretical spreading rate: 1 sq. metre per litre
Flash point: 42°C
Specific gravity: 1.1 kg/litre
Dry to touch: 16 hours (20°C)
Curing time: 2 - 3 days
Application method: Brush, soft broom, trowel or spreader
Thinner: White Spirit
Cleaning of tools: White Spirit
Surface condition The surface should be stable, firm, dry and free of dust, sand, loose old paint, dirt, grease and oil. Should not be applied in the rain or when rain is likely. Pooled water must be removed before application.
*The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate, and the relevant consumption factor. The physical constants are subject to normal manufacturing tolerances.