Flag Quick Drying Floor Varnish2.5 Litres (Gloss & Satin)

Flag Quick Drying Floor Varnish is a hard-wearing polyurethane varnish for interior and exterior use.

Manufactured in the UK by FLAG, this tough finish is suitable for a wide range of areas including wooden flooring, furniture, doors and general woodwork.

Available in either a gloss and satin finish, this quick-drying clear varnish is based on a high quality resin system that boasts excellent durability.

Before application, the surface should be stable, firm, dry and free of dust, sand, loose old paint, dirt, grease and oil.

Touch dry in 1-2 hours, depending on conditions (ideally 20°C). Over-coating can take place after 4-6 hours.

Theoretical spreading rate is 16 sq. metres per litre.

Full product data sheets and safety data sheets are available on request.

Area of use: Interior and exterior
Substrates: Wood
Packing: 2.5 Litre
Physical Constants:
Colour: Clear
Finish: Gloss & Satin
Volume solids: 42%
Theoretical spreading rate: 16 sq.metres per litre
Flash point: 36ºC
Specific gravity: 0.92
Dry to touch: 1 - 2 hours
Overcoating time: 4 - 6 hours
Application method: Brush Conventional spray Airless spray
Thinner: White Spirit
Cleaning of tools: White Spirit
Surface condition: The surface should be stable, firm, dry and free of dust, sand, loose old paint, dirt, grease and oil.
*The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate, and the relevant consumption factor. The physical constants are subject to normal manufacturing tolerances.