Flag Blackboard Paint1L & 5L (Matt Black)

Flag Blackboard Paint is suitable for wood and metal, but also ideal for coating or re-coating traditional blackboards and pin boards.

Manufactured in the UK by FLAG, it is a high-quality traditional solvent based paint.

Before application, the surface should be stable, firm, dry and free of dust, sand, loose old paint, dirt, grease and oil.

Touch dry in four hours, depending on conditions (ideally 20°C). Over-coating can take place after 16 hours.

Theoretical spreading rate is 15 sq. metres per litre.

Full product data sheets and safety data sheets are available on request.

Area of use: Interior and exterior
Substrates: Wood, metal and some composite materials
Colour: Black
Finish: Matt
Volume solids: 52%
Theoretical spreading rate: 15 sq. metres per litre*
Flash point: 38°C
Specific gravity: 1.3 kg/litre
Dry to touch: 4 hours (20°C)
Overcoating time: 16 hours
Application method: Brush, roller, Conventional spray or airless spray
Thinner: White spirit
Cleaning of tools: White spirit
Surface condition: The surface should be stable, firm, dry and free of dust, sand, loose old paint, dirt, grease and oil.
Full product data sheets and safety data sheets are available on request.
*The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate, and the relevant consumption factor. The physical constants are subject to normal manufacturing tolerances.