Flag Aqualac PU Wood Lacquer5 Litres

Flag Aqualac Wood Lacquer is the ultimate heavy-duty water-based coating for use on all new and old wood, including floors and furniture.

Aqualac PU is ideal for use on domestic and light traffic floors. It is easy to apply, quick-drying and creates a beautiful non-yellowing finish.

This lacquer is ring resistant, which means it can tolerate hot cups, and is also resistant to alcohol spills.

It is perfect for high quality furniture, dance floors, sports halls and very heavy foot traffic areas.

Before application, the surface should be stable, firm, dry and free of dust, sand, loose old paint, dirt, grease and oil.

Touch dry in 15 to 20 minutes. Over-coating can take place after two to three hours.

This product should not be used when the floor temperature is below 10 degrees centigrade or in an area subjected to cold draughts.

Theoretical spreading rate is 18 – 20 sq.metres per litre.

Full product data sheets and safety data sheets are available on request.

Area of use: Domestic flooring or light traffic areas
Substrates: Wood
Colour: Clear
Finish: Matt/Semi Matt/Gloss
Volume solids: 40%
Theoretical spreading rate: 18 – 20 sq.metres per litre
Flash point: N/A
Specific gravity: 1.02
Dry to touch: 15 – 20 minutes
Overcoating time: 2 – 3 hours
Application method: Brush
Thinner: Water
Cleaning of tools: Water
Surface condition The surface should be stable, firm, dry and free of dust, sand, loose old paint, dirt, grease and oil. 
*The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate, and the relevant consumption factor. The physical constants are subject to normal manufacturing tolerances.