Coronavirus (COVID-19): We’re still delivering to our customers safely following the latest Government advice.

Rustins Rust Converter 250ml

£7.92

- Water-based rust converter
- Ready to use
- Stabilises with a protective coat
- Seals & Primes - No primer required
- Ideal for brass, copper, bronze & metal pipes

Rustins Rust Converter is a ready-to-use, water-based treatment that neutralises rust by stabilising the surface and forming a protective coating once dry.

Ideal for treating rust on ferrous metals like brass, copper, bronze, table or chair legs and metal pipes. It will form a barrier against water vapour, oxygen and carbon dioxide to prevent further rusting. Resistant to salt spray and bacterial growth.

During preparation, the surface must be clean, dry and free from oil and grease. Remove old paint and loose rust with steel wool or wire brush. If paint is difficult to remove, use Rustins Strypit Paint and Varnish Stripper.

Stir or shake well before use. Pour the required amount needed into a plastic container. Brush a thin coat directly onto rusty areas only, working well into any pitted areas, corners and edges. Ensure that exposed corners and edges are well treated to avoid any chance of rust creep beneath.

A single coat should be sufficient. Usually dry within 30 minutes. Rustins Rust Converter will turn any treated areas blue-black as it reacts with rust.

If the area treated does not change colour, reapply after 30 minutes. Do not rinse off the first treatment. Apply a topcoat after a minimum of three hours. For best results, paint the same day.

Coverage is 6-8 square metres per litre, depending on the absorbency of the surface.

Rustins Ring Remover is sold in 250ml containers.

Full product data sheets and safety data sheets are available on request.

Product: Rust Converter
Type: A chemical treatment for the conversion of rust into a coating suitable for subsequent painting etc.
Intended: Use For use on corroded ferrous metal in order to facilitate refinishing.
Special Features: Ready to use. Water-based. Inhibits and neutralises rust. Stabilises the surface and forms a protective coating once dry. Rustins Rust Converter will form a barrier against water vapour, oxygen and carbon dioxide to prevent further rusting. Rustins Rust Converter will resist salt spray and bacterial growth.
Preparation: The surface must be clean, dry and free from oil and grease. Remove old paint and loose rust with steel wool or wire brush. If paint is difficult to remove use Rustins Strypit Paint and Varnish Stripper
Application: Stir/shake well before use. Pour the required amount needed into a plastic container. Do not return excess Rustins Rust Converter to this container. Brush a thin coat directly onto rusty areas only, working well into any pitted areas, corners and edges. Ensure that exposed corners and edges are well treated to avoid any chance of rust creep beneath.
Coats: One coat should be sufficient, but see re-coating times below. Drying Time: 30 minutes
Re-coating Time: Rustins Rust Converter will turn any treated areas blue-black as it reacts with rust. If the area treated does not change colour, reapply after 30 minutes. Do not rinse off the first treatment. Apply a topcoat after a minimum of 3 hours. For best results, paint the same day.
Application Temp: Ideally between 15 – 25 degrees C. Coverage 6-8 square metres per litre depending on the absorbancy of the surface. Maintenance: N/A
Compatibility: Try on a small test area for compatibility before using. Settlement: Stir/shake well before use.
Shelf-life/Storage: Many years in original unopened container stored in a cool, dry, dark place.
Hazards: WARNING. CAUSES SERIOUS EYE IRRITATION. Wash exposed skin thoroughly after handling. Wear protective gloves/protective clothing/eye protection/face protection. IF IN EYES; Rinse cautiously with water for several minute. Remove contact lenses if present and easy to do. Continue rinsing. If eye irritation persists seek medical advice/attention. For full safety data sheet visit www.rustins.co.uk
Clean-Up: Do not return excess Rustins Rust Converter to this container. Dispose of excess material according to local disposal regulations. Do not empty product into drains or water courses. Clean brushes immediately with water. If brushes become hard, clean with Rustins Brush Restorer or Rustins Cellulose Thinners.
Sizes: 250 ml.

Customer Product Reviews
You're reviewing:

"Rustins Rust Converter 250ml"