Coronavirus (COVID-19): We’re still delivering to our customers safely following the latest Government advice.

Rustins Quick Dry White Gloss Paint

£5.50

- Water based white gloss paint
- Touch dry in 30 minutes
- Low odour
- Extremely durable
- For interior & exterior use

Rustins Quick Dry White Gloss Paint is a brilliant white water-based hard-wearing paint for interior and exterior use that is touch dry in approximately 30 minutes.

Tough, durable and resistant to oil and water, ideal for use on wood and metal surfaces, doors, window frames, wardrobes, dressers, side boards, tables, chairs, cots and nursery furniture. Can be used over an undercoat or existing paints and varnishes on wood and metal. 

During preparation, the surface must be clean, smooth, sound, dry and free from wax, dust and contaminants. If the wood or metal surface is bare, apply the appropriate primer and undercoat before painting. Apply evenly using a good quality brush.

A single coat is usually sufficient, but a second may be applied if required. Sand lightly between coats if needed.

Drying time is around 4-8 hours, depending on the temperature and humidity. Re-coating may take place after 4-8 hours. Do not use below 10°C or in conditions of high humidity.

Coverage is 3.25 sq. metres or 35 sq. ft per 250ml tin depending on the absorbency of the surface.

Rustins Quick Dry White Gloss Paint is sold in 250ml, 500ml and 1L containers.

Full product data sheets and safety data sheets are available on request.

Product: White Gloss Paint
Type: A high gloss, brilliant white, alkyd oil-based paint.
Intended Use: Over undercoat or existing paints and varnishes on wood and metal. Interior and exterior use.
Special Features: Tough, durable and resistant to oil and water.
Preparation: The surface must be clean, smooth, sound, dry and free from wax, dust and contaminants. If the wood or metal surface is bare, apply the appropriate primer and undercoat before painting. On metal use Rustin’s Red Oxide Metal Primer. On wood use Rustin’s Quick Drying Primer & Undercoat. Existing coatings should be cleaned with Rustin’s Surface Cleaner, White Spirit, detergent or Rustins Sugar Soap and sanded lightly to provide a key, prior to painting. Cracks may be filled with Rustin’s Wood Filler. Undercoat may be applied if required. Application: Apply evenly using a good quality brush.
Coats: 1 coat is sufficient but a second coat may be applied if required. Sand lightly between coats if required.
Drying Time: 4-8 hours, depending on the temperature and humidity.
Re-coating Time: 4-8 hours, depending on the temperature and humidity.
Application Temp: Ideally, 15-25°C. Do not use below 10°C or in conditions of high humidity.
Coverage: 3.25 sq. metres or 35 sq. ft per 250ml tin depending on the absorbency of the surface.
Maintenance: The surface may be cleaned with a mild detergent solution or White Spirit as necessary. Worn areas may be re-coated once cleaned and lightly sanded to provide a key.
Compatibility: Compatible with the Rustins range and most oil based paints. Carry out test area if required.
Settlement: STIR WELL BEFORE USE.
Shelf-life/Storage: Many years if stored in original, tightly closed container in cool dry conditions.
Hazards: Flammable. Keep out of reach of children. Use only in well ventilated areas. Keep away from sources of ignition – no smoking. Avoid contact with skin and eyes. After contact with skin, wash immediately with plenty of soap and water or a proprietary skin cleanser. Do not use solvent or White Spirit. A full Health & Safety Data sheet is available upon request or on www.rustins.co.uk
Clean-Up: Clean brushes whilst wet with white spirit or Rustins Brush Cleaner. Remove excess product from brushes before cleaning. Hard brushes can be cleaned with Rustins Brush Restorer.
Sizes: 250ml 500ml 1 L

Customer Product Reviews
You're reviewing:

"Rustins Quick Dry White Gloss Paint"