Coronavirus (COVID-19): We’re still delivering to our customers safely following the latest Government advice.

Rustins Quick Dry Metal Paint

£5.18

- New improved formulation
- Water based & quick drying
- Low odour
- Satin finish
- Contains rust inhibitors
- Size & Colour Options Available

Rustins Quick Dry Metal Paint is for use on both bare and galvanised metal. It can be applied directly without the use of a primer and is suitable for indoor and outdoor use.

Ideal for gates, metal tanks and all ferrous metal surfaces. Not suitable for use under cellulose finishes.

Containing anti-corrosion additives, the paint has a low odour and dries to a smooth satin finish in just two hours. 

During preparation, the surface must be clean and free from grease and wax. Before application, stir well before use until there is no sediment on the bottom of the tin. Apply liberally with a synthetic fibre bristle brush.

Two coats will provide adequate coverage, but three coats are recommended for improved durability. Rustins Quick Dry Metal Paint will touch dry in approximately 30 mins, depending upon temperature and humidity. Re-coat after two hours. Ideally 15-25°C. Do not use below 10°C, or in conditions of high humidity. 

Coverage is 14 sq metres/litre per coat.

Rustins Quick Dry Metal Paint is sold in Black 250ml; Black 500ml; Black 1ltr; Gold 250ml; Gold 500ml; Green 250ml; Green 500ml; Silver 250ml; Silver 500ml; White 250ml; White 500ml; White 1ltr containers.

Full product data sheets and safety data sheets are available on request.

Product: Quick Dry Metal Paint.
Type: Based on high quality water-borne cross linking acrylic resin. Intended Use: A protective and decorative finish for bare metal, cast iron, aluminium and galvanised metal.
Special Features No primer required, low odour, low VOC and quick drying. For interior and exterior use.
Preparation: The surface must be clean and free from grease and wax. If already painted, remove flaking paint by scraping or use Rustins Strypit, Paint and Varnish Stripper. Remove all rust with Rustins Rust remover. Can also be used on wood and concrete.
Application: Stir well before use until there is no sediment on the bottom of the tin. Apply liberally with a synthetic fibre bristle brush. Coats 2 coats will provide adequate coverage but 3 coats are recommended for improved durability.
Drying Time: The paint will touch dry in approximately 30 mins depending upon temperature and humidity. Re-coating Time Re-coat after two hours. Application Temp. Ideally 15-25°C. Do not use below 10°C, or in conditions of high humidity. Coverage Coverage 14 sq metres/litre per coat.
Maintenance: Paint may be easily maintained by applying a further coat when required. Clean the surface with a mild detergent solution, lightly sand and re-apply.
Compatibility: If being applied to another finish carry out a small coating test to check for compatibility and adhesion.
Settlement STIR WELL BEFORE USE.
Shelf-life/Storage: A very long time if stored in a cool dry place with the lid firmly secured. Do not store below 10 C and protect from frost.
Hazards: Harmful if swallowed. Keep out of reach of children. Rinse splashes from skin and eyes with clean water. A full Safety Data Sheet is available upon request or on www.rustins.co.uk
Clean-Up: Clean the brushes immediately with water. Hard brushes can be cleaned with Rustins Brush Restorer.
Sizes: 250ml 500ml 1 L

Customer Product Reviews
You're reviewing:

"Rustins Quick Dry Metal Paint"