Coronavirus (COVID-19): We’re still delivering to our customers safely following the latest Government advice.

Rustins Polyurethane Coloured Varnish

£5.28

- For interior use
- Stains & varnishes in one
- Gloss & satin finishes available
- Tough & durable
- Resistant to oil, water and chemicals
- Size & colour options available

Rustins Polyurethane Coloured Varnish is a high build, air-drying coloured polyurethane varnish with a finish that is tough, durable and resistant to oil, water and many chemicals. 

Stains and varnishes in one. Ideal bare wood, hardboard, MDF and unsealed cork. High abrasion and mechanical impact resistance. Interior use only. For floors, use Rustins Polyurethane Floor Sealer.

A range of seven attractive natural wood shades in gloss and satin finishes - Mahogany, Oak, Dark Oak, Pine, Teak, Walnut & Antique Pine.

During preparation, the surface must be clean, smooth, sound, dry and free from wax, dust and contaminants. Apply evenly, finishing in the direction of the grain using a good quality brush. The first coat may be thinned with white spirit (one part to eight parts varnish), to act as a sealer when applying to absorbent surfaces. The colour will darken with additional coats. 

Two coats are usually sufficient on wood. Cork and more absorbent surfaces will require extra coats. Touch dry in approximately 2-4 hours, depending on the temperature and humidity.

Re-coat when the previous coat is hard dry, typically within 4-8 hours depending on the temperature and humidity. Ideal application temperature is 15-25°C. Do not use below 10°C or in conditions of high humidity.

Coverage 14-16 sq.m per litre, 1 coat, depending on the absorbency of the surface.

Rustins Polyurethane Coloured Varnish is sold in 250ml, 500ml and 1L containers.

Full product data sheets and safety data sheets are available on request.

Product: Polyurethane Coloured Varnish
Type: A high build, air-drying coloured polyurethane varnish. The finish produced is tough, durable and resistant to oil, water and many chemicals.
Intended Use: Bare wood, hardboard, MDF and unsealed cork. Interior use only. For floors, use Rustins Polyurethane Floor Sealer.
Special Features: Stains and varnishes in one. High abrasion and mechanical impact resistance. Colours available: Mahogany, Oak, Dark Oak, Pine, Teak, Walnut & Antique Pine.
Preparation: The surface must be clean, smooth, sound, dry and free from wax, dust and contaminants. Remove wax by rubbing with White Spirit and a plastic souring pad and wipe away whilst still wet. Cracks may be filled with Rustins Wood filler.
Application: Apply evenly, finishing in the direction of the grain using a good quality brush. The first coat may be thinned with White Spirit (1 part to 8 parts varnish), to act as a sealer when applying to absorbent surfaces. The colour will darken with additional coats.
Coats: 2 coats are usually sufficient on wood. Cork and more absorbent surfaces will require extra coats.
Drying Time: Touch dry in approximately 2-4 hours, depending on the temperature and humidity.
Re-coating Time: Re-coat when the previous coat is hard dry, typically within 4-8 hours depending on the temperature and humidity.
Application Temp: Ideally 15-25°C. Do not use below 10°C or in conditions of high humidity.
Coverage: 14-16 sq.m per litre, 1 coat, depending on the absorbency of the surface.
Maintenance: The varnish will take about 24 hours to dry fully. Afterwards, the surface may be cleaned by wiping with a mild detergent solution when necessary. To restore gloss, wax polish may be applied. Worn areas may be re-coated once cleaned, de-waxed and lightly sanded to provide a key.
Compatibility: The varnish may be used over the following Rustins products; Rustins Wood filler, Grain filler and Rustins Polyurethane Varnish. The colour will darken with additional coats. A lighter shade can be obtained by diluting with White Spirit. Rustins Polyurethane Clear Varnish may be applied over Varnish Stain without altering the colour.
Settlement: STIR WELL BEFORE USE. Satin and Matt finishes may dry glossy if not thoroughly stirred.
Shelf-life/Storage: Many years if stored in original, tightly closed container in cool, dry conditions.
Hazards: Flammable. Keep out of reach of children. Keep away from sources of ignition-no smoking. Avoid contact with eyes and skin, Use only in well ventilated areas. A full Health & Safety Data Sheet is available upon request or at www.rustins.co.uk
Clean-Up: Use White Spirit or Rustins Brush Cleaner whilst still wet. If dried on, clean equipment and brushes with Rustins Brush Restorer.
Sizes: 250ml, 500ml and 1 L

Customer Product Reviews
You're reviewing:

"Rustins Polyurethane Coloured Varnish"