Rustins Plastic Floor Coating Trade Pack

4 Litres
£81.00
£56.05
£67.26 (inc VAT)
Special Offer

- Two-part cold cure lacquer
- Use on wood, chipboard, MDF, cork, laminates, slate & stone
- Resistant to heat, solvents & abrasion
- Almost colourless
- Does not yellow or craze with age
- Gloss & satin finishes available
- 4 litres


Description

Rustins Plastic Floor Coating Trade Pack is a two-part cold cure lacquer with excellent adhesion and durability.

Resistant to scratching, abrasion, most solvents, weak acids and alkalis, the coating can be applied to wood, cork, chipboard, MDF, laminates, slate and stone. Almost colourless and will not craze or yellow on ageing.

The finish is highly durable, resistant to impact, abrasion and solvents. Rustins Plastic Floor Coating enhances the colour of the wood. Although the coating is almost colourless, some woods change colour when coated.

During preparation, the surface must be clean, smooth, dry and free from wax, dust and contaminants. Using a large brush or varnish roller, apply evenly and liberally, finishing in the direction of the grain. Rustins Plastic Coating Thinners (up to 10 per cent) may be added to aid the application in hot weather. No other thinners may be added to the coating.

Two coats are usually sufficient on hardwood floors, but in heavy traffic areas, apply three coats. Softwoods and cork may require a minimum of three coats, depending on the absorbency. Commercial premises may require four coats.

Re-coatable after an hour, floor can be used two hours after last coat has been applied. Available in Gloss and Satin finish. Do not use below 15ºC, or in conditions of high humidity.

Coverage 13-15 sq. m per litre, 1 coat, depending on the absorbency of the wood.

Rustins Plastic Floor Coating Trade Pack is sold in 4L containers.

Full product data sheets and safety data sheets are available on request.

Specification

Product Plastic Floor Coating Gloss and Satin finish
Type: A two-part cold cure finish, based on Alkyd plasticised Urea Formaldehyde resins.
Intended Use: Bare wood, hardboard, MDF, slate, unsealed cork and vinyl tiles. For interior use only.
Special Features: Quick-drying. Non-yellowing on ageing. The finish is highly durable, resistant to impact, abrasion and solvents. Enhances the colour of the wood. The coating is almost colourless, but some woods change colour when coated. See product packaging for further information.
Preparation: The surface must be clean, smooth, dry and free from wax, dust and contaminants. Read the full instructions on the tin. Our sheet on renovating floors contains further information. Nail holes and small cracks may be filled with Rustins Woodfiller. Bare wood may be dyed before coating with Rustins Wood Dye. Other brands of dye, stain or paints may be incompatible. Do not apply Knotting or Sanding Sealer.
Application: Using a large brush or varnish roller, apply evenly and liberally, finishing in the direction of the grain. Rustins Plastic Coating Thinners (up to 10%) may be added to aid the application in hot weather. No other thinners may be added to the coating.
Coats: Two coats are usually sufficient on hardwood floors, but in heavy traffic areas, apply 3 coats. Softwoods and cork may require a minimum of 3 coats, depending on the absorbency. Commercial premises may require 4 coats.
Drying Time: The coating is generally touch-dry within 30 minutes – 1 hour, depending on the temperature.
Re-coating Time: May be re-coated after a minimum of 1 hour.
Application Temp: Ideally 15-25ºC. Do not use below 15ºC, or in conditions of high humidity.
Coverage: 13-15 sq. m per litre, 1 coat, depending on the absorbency of the wood.
Maintenance: The coating will accept light foot traffic 2 hours after the final coat and will take 7 days to fully harden. During this period, it should be protected from heavy wear and spills. Afterwards, the surface may be kept clean by mopping with a mild detergent solution. To restore the gloss, use Rustins Floor Shine. Worn areas may be re-coated once cleaned and sanded, to provide a key. It is not necessary to re-coat the whole floor.
Compatibility: Only use solvent-resistant floor tile adhesives under this product. The coating may be used over Rustins Woodfiller/Wood Dye. Wood may be bleached before coating with Rustins Wood Bleach. Important. If any other products are used, such as timber treatments or other brands of dye, stain or paints, these must be tested first for compatibility.
Settlement: STIR WELL BEFORE AND DURING USE. Satin finishes may dry glossy if not stirred.
Shelf-life/Storage: Many years if stored in original, tightly closed containers in normal conditions.
Hazards: Highly flammable. Keep away from sources of ignition- no smoking. Avoid contact with skin and eyes. Do not empty into drains. Wear suitable gloves. Keep container tightly closed. A full Safety Data Sheet is available upon request or on Rustins Web Site.
Clean-Up: Clean equipment immediately after use with Rustins Plastic Coating Thinners or Rustins Cellulose Thinners, as once hardened, the coating cannot be removed.
Sizes: 1 litre 4 litre

Reviews

You're reviewing:

"Rustins Plastic Floor Coating Trade Pack"