Coronavirus (COVID-19): We’re still delivering to our customers safely following the latest Government advice.

Rustins High Heat Black Paint

£10.08

- Solvent based black paint
- Heat resistant to 600OC
- For wood burning stoves, barbecues & grates
- Protective & decorative
- 400ml is an aerosol
- Matt finish

Rustins High Heat Black Paint is a fast-drying decorative paint that can withstand temperatures of up to 600 degrees centigrade.

Ideal for application on surfaces that typically witness extreme temperatures, such as wood burning stoves, barbecues, domestic and industrial stoves, furnace chimneys, grates and exhausts.

Rustins High Heat Black Paint is touch dry in just 15 minutes, leaving a stylish matt finish. It can easily endure typical barbecue temperatures and even roaring fireplace heat, which in the most extreme case rarely exceeds 540 degrees centigrade.

During preparation, the surface must be clean, dry and free from grease, dust rust and other contaminants. Remove all rust with a scrapper or use Rustins Rust Remover. Stir well before use until there is no sediment on the bottom of the tin. Apply with a bristle paint brush. The paint may be sprayed but may require dilution with Xylene Thinners. 

Only one light coat should be applied. The surface will be touch dry within 15 minutes and can be handled in an hour in good conditions. The painted article if air dried will become fully cured once it has been heated up to between 200 - 220° C for approximately 20 minutes. The paint should not be re-coated.

Coverage is 15 sq metres/litre per coat depending type of application and surface.

Rustins High Heat Black Paint is sold in 250ml / 500ml / 400ml (aerosol - 400ml only) containers.

Full product data sheets and safety data sheets are available on request.

Product: High Heat Black Matt Paint
Type: Solvent based Silicone Alkyd High Heat Paint.
Intended Use: The paint is only suitable for use on ferrous Metals such as wood burning stoves, barbeques, domestic and industrial stoves, furnace chimneys, grates and exhausts.
Special Features: A fast drying, protective and decorative paint suitable for temperatures of up to 600° C
Preparation: The surface must be clean, dry and free from grease, dust rust and other contaminants. Remove all rust with a scrapper or use Rustins Rust Remover. If the product should only be applied to bare metal and not previously coated surfaces.
Application: Stir well before use until there is no sediment on the bottom of the tin. Apply with a bristle paint brush. The paint may be sprayed but may require dilution with Xylene Thinners.
Coats: Only one light coat should be applied. If a heavy coat or more than one coat is applied it is possible that the paint will flake from the surface.
Drying Time: The surface will be touch dry within 15 minutes and can be handled in 1 hour in good conditions. The painted article if air dried will become fully cured once it has been heated up to between 200 - 220° C for approximately 20 minutes.
Re-coating Time: The paint should not be recoated.
Application Temp: Ideally 15-25°C. Do not use below 10°C, or in conditions of high humidity.
Coverage: 15 sq metres/litre per coat depending type of application and surface.
Maintenance: The previous coat will need to be removed if recoating becomes necessary.
Compatibility: N/A
Settlement: Stir well before use.
Shelf-life/Storage: The shelf life of the product is 2 years. It is preferable to store the product in a cool place. It is important to replace the lid and ensure an airtight seal after use. NOTE: The product may be used after shelf life has expired but should first be checked to ensure that there is no deterioration of quality.
Hazards: Flammable. Keep out of reach of children. Keep away from sources of ignition- no smoking. Avoid contact with skin and eyes. Use only in well ventilated areas. A full Safety Data Sheet is available upon request or on Rustins Web Site.
Clean-Up: Remove as much product as possible from brushes before cleaning. Clean whilst wet with Rustin Cellulose Thinners or Xylene based Thinners. Hard brushes can be cleaned with Rustins Brush Restorer.
Sizes: 250ml 500ml 

Customer Product Reviews
You're reviewing:

"Rustins High Heat Black Paint"