Coronavirus (COVID-19): We’re still delivering to our customers safely following the latest Government advice.
Rustins Door Oil is a clear satin finish that is hard wearing, water and stain resistant that will dry to an attractive, durable, natural finish.
Suitable for use on internal woodwork subject to a high degree of wear such as doors, floors and balustrades. The oil brings out the natural beauty of the wood and makes wood colours become richer/warmer, leaving a hard wearing, water and stain-resistant finish to woodwork.
Rustins Door Oil brings out the natural beauty of the wood. Makes wood colours become richer. Easy to apply and maintain, leaving a wear, water and stain resistant finish to woodwork.
During preparation, the wood must be bare, sanded clean, smooth, dry and free from wax, dust and surface contaminants.
Using a brush or roller, apply evenly in the direction of grain. Rustins Wood Dye may be used under or in Rustins Door Oil if desired. Test before proceeding if other brands of wood colourant are to be used.
Apply a minimum of two coats initially. Drying Time 4-6 hours depending on temperature and humidity. Wait 4 -6 hours before re-coating.
Coverage is 20-30sq.m. per litre, depending on the nature of the wood.
Rustins Door Oil is sold in 750ml containers.
Full product data sheets and safety data sheets are available on request.
Product: Door Oil
Type: Rustins Door Oil is a mixture of natural vegetable oils, waxes and resins dissolved in white spirit giving an at tractive, durable satin finish Intended Use: For internal wooden doors and joinery.
Special Features: Brings out the natural beauty of the wood. Makes wood colours become richer. Easy to apply and maintain; leaving a wear, water and stain resistant finish to woodwork
Preparation: The wood must be bare, or sanded clean of any previous coatings. The wood must also be smooth, dry and free from wax, dust and surface contaminants. Remove any waxes present with Rustins Surface Cleaner and a scouring pad. Wipe off residues with clean rags. Oily timbers such as Teak or Iroko must be wiped over with white spirit to remove surface oils which may inhibit drying and penetration of Rustins Door Oil. Minor damage/splits may be repaired/filled with Rustins Wood Filler.
Application: Using a brush or roller, apply evenly in the direction of grain. Rustins Wood Dye may be used under or in Rustins Door Oil if desired. Test before proceeding if other brands of wood colourant are to be used.
Coats: Apply a minimum of 2 coats initially.
Drying Time: 4 -6 hours, depending on temperature and humidity.
Re-coating Time: 4 -6 hours, depending on temperature and humidity.
Application Temp: Ideally 15-25 deg. C. Do not apply below 5 deg. C.
Coverage: 20 – 30 sq. m. per litre, depending on the nature of the wood.
Maintenance: The door should be cleaned with a well-wrung cloth or mop, using a mild detergent solution. Dirt and scratches may be removed by rubbing with a plastic scouring pad. If the surface has become dull or worn, it may be refinished after cleaning.
Compatibility: Rustins Door Oil may be used over the following Rustins products: Rustins Wood Dye, Grain/Wood Filler. Rustins Wood Dye may be added to Rustins Door Oil. Rustins Polyurethane Varnish may be applied over Rustins Door Oil. Prior to using it is advisable to test a small area first. Rustins Door Oil has been tested on a wide range of veneered doors, but not all such doors available on the market. Refer to door manufacturer’s instructions for recommendations regarding suitable finishing products.
Settlement: Stir well before use.
Shelf-life/Storage: Many years in original sealed packaging if stored in cool, dry conditions.
Hazards: Flammable. Avoid contact with eyes and skin. Use in a well-ventilated area. Keep out of reach of children. Keep away from sources of ignition – no smoking while using. Keep container tightly closed. Full Product and Safety Data Sheets are available on request or from Rustins website www.rustins.co.uk
Clean-Up: Clean brushes with white spirit or Rustins Brush Cleaner if still wet. Hard brushes may be cleaned with Rustins Brush Restorer. Hardened oil may be removed using Rustins Strypit Paint & Varnish remover.