Coronavirus (COVID-19): We’re still delivering to our customers safely following the latest Government advice.

Rustins Damp Seal

£5.88

- For interior use
- Seals & blocks damp stains
- Allows trapped moisture to escape
- Can be applied to damp surfaces
- Can be overpainted & wallpapered over
- 1 coat application
- Fast drying
- Choice Of Sizes Available

Rustins Damp Seal is a fast-drying, high-performance interior paint that permanently covers damp, water stains and most household stains.

It dries with a long lasting permanent seal over damp walls and ceilings. It can be over coated with gloss, emulsion paint and wallpaper. Rustins Damp Seal does not cure damp, but allows trapped moisture to escape.

Prior to application, the surface must be clean and free from dust, loose paint and fungal growth or solid matter likely to interfere with the penetration of the sealer. Rustins Damp Seal must be stirred well before use and two coats applied liberally, brushing out approximately 30cm beyond affected area.

Drying time is 1-2 hours and two hours between re-coating in warm conditions. Allow two hours when applying a top coat or wallpaper.

Coverage is 7 sq.m per litre depending on absorbency of surface being treated. It can be over coated with most oil based and water based paints.

Rustins Damp Seal is sold in 250ml, 500ml and 1lt containers.

Full product data sheets and safety data sheets are available on request.

Product: Rustins Damp Seal
Type: A quick drying interior high performance solvent based paint based on polyester.
Intended Use: For covering damp walls and ceilings, water stains and most household stains.
Special Features: Quick drying and can be over coated with gloss or emulsion paint as well as wall paper. It does not cure damp but allows trapped moisture to escape. Not for exterior use.
Preparation: The surface must be clean and free from dust, loose paint and fungal growth or solid matter likely to interfere with the penetration of the sealer.
Application: Stir well before use and apply 2 liberal coats.
Coats: Apply 2 coats and brush out approx. 30 cms beyond affected area.
Drying Time: 1-2 hrs.
Re-coating Time: 2 hrs between coats in warm conditions. Allow 2 hrs before applying a top coat or wall paper.
Application Temp: Ideally 15-25 C. Do not use below 10 C or in conditions of high humidity.
Coverage: 7 square metres per litre depending on absorbency of surface being treated.
Maintenance N/A
Compatibility: Can be over coated with most oil based and water based paints.
Settlement: STIR WELL BEFORE USE.
Shelf-life/Storage: A very long time if stored in a cool dry place with the lid firmly secured. Do not store below 10 C.
Hazards: Flammable. Repeated exposure may cause skin dryness or cracking. Keep product out of reach of children. In case of contact with eyes rinse immediately with plenty of water and seek medical advice. After contact with skin wash immediately with plenty of water. Wear suitable protective clothing and gloves. Use only in well ventilated areas.
Clean-Up: Remove as much product as possible from the brush and clean with Rustins Xylene Thinners or Rustins Brush Cleaner. Hard brushes can be cleaned with Rustins Brush Restorer.
Sizes: 250ml,500ml, 1Lt.

Customer Product Reviews
You're reviewing:

"Rustins Damp Seal"